Перейти к основному содержанию

Sony PSone Laser Assembly Replacement

Выберете то, что вам нужно

  1. Sony PSone Laser Assembly Replacement, Upper Case: шаг 1, изображение 1 из 1
    • Remove all cables plugged into the PlayStation.

  2. Sony PSone Laser Assembly Replacement: шаг 2, изображение 1 из 2 Sony PSone Laser Assembly Replacement: шаг 2, изображение 2 из 2
    • Flip over the PlayStation and remove the six screws from the bottom.

  3. Sony PSone Laser Assembly Replacement: шаг 3, изображение 1 из 1
    • Flip the PlayStation back.

    • There are no screws holding EVERYTHING inside the PlayStation so better hold it like a burger while flipping.

  4. Sony PSone Laser Assembly Replacement: шаг 4, изображение 1 из 2 Sony PSone Laser Assembly Replacement: шаг 4, изображение 2 из 2
    • Lift up and remove the upper case.

  5. Sony PSone Laser Assembly Replacement, Laser Assembly: шаг 5, изображение 1 из 3 Sony PSone Laser Assembly Replacement, Laser Assembly: шаг 5, изображение 2 из 3 Sony PSone Laser Assembly Replacement, Laser Assembly: шаг 5, изображение 3 из 3
    • Disconnect the cables from the PSone’s board.

    • Take extreme care when disconnecting the ribbon cable from motherboard. You risk damaging the cable if you’re not careful.

Заключение

To reassemble your device, follow these instructions in reverse order.

11 участников успешно повторили данное руководство.

Marjorie

Участник с: 12/23/13

2 273 Репутация

Автор 11 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 8

За последние 30 дней: 38

За всё время: 5,975