Перейти к основному содержанию

Polycom SoundStation Back Housing Replacement

Выберете то, что вам нужно

  1. Polycom SoundStation Back Housing Replacement, Back Housing: шаг 1, изображение 1 из 1
    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

  2. Polycom SoundStation Back Housing Replacement: шаг 2, изображение 1 из 2 Polycom SoundStation Back Housing Replacement: шаг 2, изображение 2 из 2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Заключение

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

Участник с: 09/02/14

431 Репутация

Автор 4 руководств

Команда

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 Участник USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014

USFSM-STEWART-F14S1G3

3 членов

Автор 14 руководств

Один комментарий

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 7

За всё время: 1,150