Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Installing the video card involves removing the outer case before actual installation.

Запчасти

Детали не указаны.

  1. Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case. Push back the handle after you have taken the core out of the case. Push back the handle after you have taken the core out of the case.
    • Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.
    • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

  3. Slowly lift the plate off the cube and disconnect the power cord.
    • Slowly lift the plate off the cube and disconnect the power cord.

  4. Remove the four pillars from each corner.
    • Remove the four pillars from each corner.

    • The pillars should come out fairly easily.

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  6. Remove the screws on the back of the VGA port.
    • Remove the screws on the back of the VGA port.

  7. Remove the screw attaching the video card to the logic board.
    • Remove the screw attaching the video card to the logic board.

  8. Remove power cord from the video card. Remove power cord from the video card.
    • Remove power cord from the video card.

  9. Remove the power cord.
    • Remove the power cord.

    • Remove the connector.

    • Remove the video card from the logic board.

  10. Carefully lift the video card from the logic board.
    • Carefully lift the video card from the logic board.

    • The video card should come out easily.

  11. Separate the video card from the adapter. Separate the video card from the adapter.
    • Separate the video card from the adapter.

Заключение

To reassemble your device, follow these instructions in reverse order.

7 участников успешно повторили данное руководство.

Ryan Chun

Участник с: 24.06.2010

872 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 2-7, Johann Summer 2010 Участник Cal Poly, Team 2-7, Johann Summer 2010

CPSU-JOHANN-R10S2G7

5 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 1

За последние 30 дней: 23

За всё время: 9,110