Перейти к основному содержанию

Power Mac G4 Quicksilver Hard Drive Assembly Replacement

Выберете то, что вам нужно

  1. Power Mac G4 Quicksilver Hard Drive Assembly Replacement, Hard Drive Assembly: шаг 1, изображение 1 из 1
    • The hard drive is located in the back right corner of the case.

  2. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: шаг 2, изображение 1 из 1
    • Remove the flat ribbon cable by pulling with substantial force.

  3. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: шаг 3, изображение 1 из 1
    • Remove the screw holding the hard drive to the computer.

  4. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: шаг 4, изображение 1 из 1
    • Pull the drive up and out of the computer.

  5. Power Mac G4 Quicksilver Hard Drive Assembly Replacement: шаг 5, изображение 1 из 1
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Заключение

To reassemble your device, follow these instructions in reverse order.

10 участников успешно повторили данное руководство.

Ryan Bylard

Участник с: 01/20/10

1 325 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 14-41, Regan Winter 2010 Участник Cal Poly, Team 14-41, Regan Winter 2010

CPSU-REGAN-W10S14G41

4 членов

Автор 17 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 10

За всё время: 7,335