Перейти к основному содержанию
  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас

    PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас
  3. Remove the single Phillips #1 screw circled in the picture. Set it aside for later. The graphics card is outlined in red in the second image, if you are confused on where this is.
    • Remove the single Phillips #1 screw circled in the picture. Set it aside for later.

    • The graphics card is outlined in red in the second image, if you are confused on where this is.

  4. Lift the graphics card straight out of it's PCI slot.
    • Lift the graphics card straight out of it's PCI slot.

    • Be careful not to lift sideways, you can damage the PCI slot! Try your best to lift the graphics card straight up.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Aaron Cooke

Участник с: 28.08.2018

18 118 Репутация

Автор 21 руководств

Команда

NIWOTech Member of NIWOTech

Community

0 членов

Автор 0 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 14

За всё время: 223