Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

Power Macintosh G3 Blue and White Modem Replacement

Выберете то, что вам нужно

  1. Power Macintosh G3 Blue and White Modem Replacement, Before opening up your Power Mac...: шаг 1, изображение 1 из 1
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

  2. Power Macintosh G3 Blue and White Modem Replacement: шаг 2, изображение 1 из 1
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  3. Power Macintosh G3 Blue and White Modem Replacement: шаг 3, изображение 1 из 1
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

  4. Power Macintosh G3 Blue and White Modem Replacement: шаг 4, изображение 1 из 1
    • Disconnect the modem’s flex cable from the connector on the logic board.

    • Lift the modem assembly out of it´s place on the logic board.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

[deleted]

Участник с: 08/28/18

26 409 Репутация

Автор 21 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 14

За всё время: 630