Перейти к основному содержанию

Power Macintosh G3 Blue and White RAM Replacement

Выберете то, что вам нужно

  1. Power Macintosh G3 Blue and White RAM Replacement, RAM: шаг 1, изображение 1 из 1
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Power Macintosh G3 Blue and White RAM Replacement: шаг 2, изображение 1 из 1
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

  3. Power Macintosh G3 Blue and White RAM Replacement: шаг 3, изображение 1 из 2 Power Macintosh G3 Blue and White RAM Replacement: шаг 3, изображение 2 из 2
    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

[deleted]

Участник с: 08/28/18

26 298 Репутация

Автор 21 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 20

За всё время: 932