Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

Accessing the RAM is easy and requires only a Phillips screwdriver.

  1. Use a coin to turn the battery locking screw 90 degrees clockwise.
    • Use a coin to turn the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  3. Remove the four Phillips screws from the memory door.
    • Remove the four Phillips screws from the memory door.

    • Slide the memory door away from the memory compartment.

  4. Release the tabs on each side of the RAM chip at the same time.  These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the chip directly out from its connectors. If there is a second RAM chip installed, pop it out in the same manner.

Заключение

To reassemble your device, follow these instructions in reverse order.

28 участников успешно повторили данное руководство.

Прикрепленные документы

iRobot

Участник с: 24.09.2009

1 Репутация

Автор 648 руководств

Один комментарий

After removing the ram the computer is not working

Apias king - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 6

За всё время: 26,422