Перейти к основному содержанию

PowerBook G4 Titanium Mercury RAM Replacement

Выберете то, что вам нужно

  1. PowerBook G4 Titanium Mercury RAM Replacement, Keyboard: шаг 1, изображение 1 из 1
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. PowerBook G4 Titanium Mercury RAM Replacement: шаг 2, изображение 1 из 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. PowerBook G4 Titanium Mercury RAM Replacement: шаг 3, изображение 1 из 1
    • Your laptop should look approximately like this.

  4. PowerBook G4 Titanium Mercury RAM Replacement, RAM: шаг 4, изображение 1 из 1
    • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

    • Pull the RAM chip out.

    • Repeat this process if a second RAM chip is installed.

Заключение

To reassemble your device, follow these instructions in reverse order.

13 участников успешно повторили данное руководство.

Прикрепленные документы

iRobot

Участник с: 09/24/09

1 Репутация

Автор 636 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 7

За всё время: 9,308