Перейти к основному содержанию

Presidential Air valve

Выберете то, что вам нужно

  1. Presidential  Air valve, Air valve hose clamp: шаг 1, изображение 1 из 1
    • Remove the 2 screws

    • This cover may require some wiggling to remove. DO NOT FORCE it, it has medium sized plastic clips along the edges that lock into metal slots . When forced it will cause these tabs to break.

  2. Presidential  Air valve: шаг 2, изображение 1 из 3 Presidential  Air valve: шаг 2, изображение 2 из 3 Presidential  Air valve: шаг 2, изображение 3 из 3
    • To Begin we need to put the chair into manual Shiatsu to move the mechanism to the middle of the track

    • Select Manual and then Mode

    • Select Shiatsu by kitting the "ok" button

    • Lastly select Manual , Position and point

    • From here using the UP and DOWN arrows in the middle of the remote HOLD the DOWN arrow and the mechanism should move down until you release the button. Make sure you stop the mechanism in area on the track where you can access the top of the mechanism .

  3. Presidential  Air valve: шаг 3, изображение 1 из 3 Presidential  Air valve: шаг 3, изображение 2 из 3 Presidential  Air valve: шаг 3, изображение 3 из 3
    • air valve is located here

    • one hose should be located to the left of the valve

    • other 2 hoses will be located on the right side

    • DO NOT RE ZIP HOSES USE PROVIDED CLAMPS AS THIS WILL JUST REPEAT ITSELF UNTIL CLAMP IS INSTALLED

Заключение

To reassemble your device, follow these instructions in reverse order.

Nick

Участник с: 05/30/17

2 737 Репутация

Автор 16 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 25