Перейти к основному содержанию

Protocol Dronium 3x Controller Battery Replacement

Выберете то, что вам нужно

  1. Protocol Dronium 3x Controller Battery Replacement, Controller Battery: шаг 1, изображение 1 из 2 Protocol Dronium 3x Controller Battery Replacement, Controller Battery: шаг 1, изображение 2 из 2
    • Ensure the controller is powered off.

    • Using a Phillips #0 screwdriver, unscrew the screw holding the battery lid on the controller. Keep in mind that the screw will be attached to the lid.

    • Remove lid and screw.

  2. Protocol Dronium 3x Controller Battery Replacement: шаг 2, изображение 1 из 1
    • Remove batteries from battery compartment.

    • Discard the used batteries.

    • Place new batteries in the controller in the correct orientation.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Alexander George

Участник с: 09/17/18

395 Репутация

Автор 4 руководств

Команда

Washington State, Team S29-G7, Hope Fall 2018 Участник Washington State, Team S29-G7, Hope Fall 2018

WSU-HOPE-F18S29G7

3 членов

Автор 4 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 4

За всё время: 157