Введение
In order to reach the rear speaker, the back of the tablet must be removed. This guide requires basic knowledge of soldering.
Выберете то, что вам нужно
-
-
Run a spudger tool around the edge of the screen to loosen it and begin to pry upward.
-
The screen will be able to be removed once you see it pop up like it has in the photo.
-
-
-
Инструмент, используемый на этом этапе:Tweezers$4.99
-
With a soldering iron, remove the wires from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
3 участников успешно повторили данное руководство.