Введение
Sometimes the issues with the phone may deal with an internal malfunction. This guide demonstrates how to take apart the base of the speakerphone as a prerequisite for internal technical repair. The base must be removed before accessing the internal parts.
Выберете то, что вам нужно
-
-
Remove the eight 11mm screws found on the bottom side of the base with a Phillips #00 screwdriver.
-
-
-
-
Unclip the wires that connect the front piece to the circuit board on the back piece.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Penn State, Team 1-17, Kaschak Winter 2015 Участник Penn State, Team 1-17, Kaschak Winter 2015
PSU-KASCHAK-W15S1G17
4 членов
Автор 6 руководств
