Введение
Ever want to disassemble and reassemble your Delphi MyFi XM2GO portable XM radio? Follow this guide to learn how to remove the motherboard (PCB logic board) of the Delphi MyFi XM2GO portable XM radio. You will need a Torx T6 screwdriver to complete this guide. Warning: you may have to use your fingernails to pry off certain parts.
Выберете то, что вам нужно
-
-
Locate the large button on the top of the device.
-
Push down on the button and slide the cover away from the button.
-
-
-
Grab the red pull tab and pull down to unlock the latch.
-
Pull the battery out.
-
-
-
Remove the four screws from the bottom of the device using a T6 Torx screwdriver.
-
-
-
-
Remove the button cover on the back of the device by prying it up with a spudger or your thumb nail.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Clemson, Team 1-2, Benson Spring 2012 Участник Clemson, Team 1-2, Benson Spring 2012
CLEM-BENSON-S12S1G2
3 членов
Автор 9 руководств
