Перейти к основному содержанию

Removing Minolta X-370 Film Winding Lever

Выберете то, что вам нужно

  1. Removing Minolta X-370 Film Winding Lever, Film Winding Lever: шаг 1, изображение 1 из 2 Removing Minolta X-370 Film Winding Lever, Film Winding Lever: шаг 1, изображение 2 из 2
    • Lift up the winding lever and rotate it clockwise to open the back film compartment.

  2. Removing Minolta X-370 Film Winding Lever: шаг 2, изображение 1 из 2 Removing Minolta X-370 Film Winding Lever: шаг 2, изображение 2 из 2
    • Lift up the winding handle and remove one 3.85mm screw.

    • Remove the film winding handle.

  3. Removing Minolta X-370 Film Winding Lever: шаг 3, изображение 1 из 2 Removing Minolta X-370 Film Winding Lever: шаг 3, изображение 2 из 2
    • Pull the film winder down until it comes free.

    • Do not close the film compartment. The compartment will not open without the film winding lever installed properly.

    The film wonder handle does not slide back up in place. There is something blocking the way so it will not slide back up in place. What do I do now?

    Richard Hood - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Nick

Участник с: 04/19/11

525 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 8-7, Regan Spring 2011 Участник Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 членов

Автор 8 руководств

Один комментарий

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 38

За всё время: 12,468