Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.
Выберете то, что вам нужно
-
Этот шаг не переведен. Помогите перевести
-
Lay the printer on its back.
-
Grab the paper tray by its right side and pull it to the left and up.
-
-
-
Этот шаг не переведен. Помогите перевести
-
Open the frontal access panel by lifting it from the top.
-
Similar to the paper tray, grab it from the right side and pull it to the left and up.
-
-
Этот шаг не переведен. Помогите перевести
-
Take out the two frontal 14.0 mm Torx #10 screws.
-
Carefully lift the frontal cover.
-