Введение

Camera went completely dead - removed the front cover and found a screw loose. Replaced it and the camera worked fine. This could be a problem for others.

Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”
  • Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”

Добавить комментарий

Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and  firmly tighten it. Reposition and tighten the covers.  Problem solved!
  • Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and firmly tighten it. Reposition and tighten the covers. Problem solved!

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Frank

Участник с: 13.04.2011

25 Репутация

1 Guide authored

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 672