Use this guide to repair a broken scroll wheel. Be advised, the longevity of your repaired mouse will depend on the strength of the glue or epoxy used in the repair.


Никакие детали не требуются.

  1. Slide the tab on the bottom of the mouse to release the top panel.
    • Slide the tab on the bottom of the mouse to release the top panel.

    Добавить комментарий

  2. Remove the top panel from the mouse.
    • Remove the top panel from the mouse.

    Добавить комментарий

    • Remove four 7mm Phillips #1 screws.

    Добавить комментарий

    • Use a spudger to pry the upper shell from the mouse at the cord entrance.

    • Move slowly. The upper case is connected to the mouse with delicate wires.

    Добавить комментарий

    • Lift the scroll wheel out of the mouse.

    Добавить комментарий

    • Wiggle the USB cord free of the mouse.

    • Resist the temptation to yank the cord free. The wires are very delicate and soldered connections are weak

    Добавить комментарий

    • Remove one 3mm Phillips #1 screw.

    • The quantity and location of screws holding the board to the mouse depends on the manufacture date of this mouse. All screws should be easy to find.

    Добавить комментарий

    • Push the broken axle piece out of the socket.

    Добавить комментарий

    • Glue broken axle piece back onto the scroll wheel.

    • This repair will last only as long as your glue or epoxy holds. The axle will re-break with weak glue and heavy use. My axle survived several heavy use days, just long enough for Monoprice to send me a new mouse.

    Добавить комментарий


To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jeff Snyder

Участник с: 07.02.2013

2 898 Репутация

Автор 4 руководств


iFixit Member of iFixit


114 членов

Автор 7 025 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 480