Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

How to adjust exposure. Use when pictures are over or under exposed.

  1. Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place. If your camera is old or dirty, it may take more force to open the flash assembly.
    • Open the flash assembly by holding the sides of the top piece of the camera and pushing up gently until it snaps into place.

    • If your camera is old or dirty, it may take more force to open the flash assembly.

  2. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  3. Locate the exposure setting switch under the main lens on the face of the camera.
    • Locate the exposure setting switch under the main lens on the face of the camera.

  4. Slide light switch towards the black arrow on the left to decrease exposure. Slide light switch towards the white arrow on the right to increase exposure.
    • Slide light switch towards the black arrow on the left to decrease exposure.

    • Slide light switch towards the white arrow on the right to increase exposure.

Финишная черта

Еще один человек закончил это руководство.

Matthew Lessig

Участник с: 20.01.2010

54 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 3-18, Maness Winter 2010 Участник Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 6

За последние 30 дней: 27

За всё время: 8,378