Перейти к основному содержанию

Replacing the Battery of the Fujitsu Primergy

Выберете то, что вам нужно

Рекомендуемый документ

  1. Replacing the Battery of the Fujitsu Primergy, Open the Case: шаг 1, изображение 1 из 1
    • Pull the green tab on the side and pull back the panel

    • Remove the panel and store it somewhere

    • On page 37 of the manual there is a description similar to that of this article

  2. Replacing the Battery of the Fujitsu Primergy, Remove the fan on the CPUs: шаг 2, изображение 1 из 1
    • Press the two green tabs and pull up the fan on the CPUs

    • Be careful to take it easy, the fan cable is short (red arrow)

  3. Replacing the Battery of the Fujitsu Primergy, Remove PCIe cards: шаг 3, изображение 1 из 2 Replacing the Battery of the Fujitsu Primergy, Remove PCIe cards: шаг 3, изображение 2 из 2
    • Press on the green clips

    • Slowly pull the cards out of the slots

    • It would be advisable to connect to the ground first

  4. Replacing the Battery of the Fujitsu Primergy, Remove the battery: шаг 4, изображение 1 из 2 Replacing the Battery of the Fujitsu Primergy, Remove the battery: шаг 4, изображение 2 из 2
    • Press on the clip (in red) and the battery should come out by itself

    • Insert the new battery

    • Check the polarity, usually the writings must be upwards

Заключение

By replacing the CMOS battery the settings should remain saved

Особая благодарность этим переводчикам:

it en

100%

Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Прикрепленные документы

Marc developer

Участник с: 08/16/21

1 348 Репутация

Автор 4 руководств

Команда

iFanatics Участник iFanatics

Community

54 членов

Автор 156 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 15

За последние 30 дней: 72

За всё время: 618