Выберете то, что вам нужно
-
-
Place the device face down.
-
Use a T15 Torx screwdriver to remove the six screws in the base plate.
-
Lift the base plate off of the device.
-
-
-
-
Flip the circuit board over to the right.
-
Gently pull the ribbon cable outward to disconnect it from the circuit board.
-
-
-
Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.
-
Remove the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
The Citadel Military College of South Carolina, Team S3-G22, Eggleston Fall 2020 Участник The Citadel Military College of South Carolina, Team S3-G22, Eggleston Fall 2020
CMCSC-EGGLESTON-F20S3G22
2 членов
Автор 3 руководств
2 Комментариев
Where to find a power supply circuit board for my Remstar plus m series which just blinks blue lights. dledes@shaw.ca
