Перейти к основному содержанию

Roku 2 Roku 2 Motherboard Replacement

Выберете то, что вам нужно

  1. Roku 2 Roku 2 Motherboard Replacement, Roku 2 Motherboard: шаг 1, изображение 1 из 1
    • Heat up the iOpener for 30 seconds in the microwave and place across rubber pads on the back of the device.

    • It may take multiple heats, left for a minute at a time, to properly loosen the glue.

  2. Roku 2 Roku 2 Motherboard Replacement: шаг 2, изображение 1 из 1
    • Gently use the plastic opening tool to pry the rubber pads off.

  3. Roku 2 Roku 2 Motherboard Replacement: шаг 3, изображение 1 из 1
    • Remove the four Phillips #000 screws from the bottom of the case.

  4. Roku 2 Roku 2 Motherboard Replacement: шаг 4, изображение 1 из 1
    • Gently remove the under side of the device.

  5. Roku 2 Roku 2 Motherboard Replacement: шаг 5, изображение 1 из 1
    • Remove the middle component that is held in place by the top and bottom of the device.

  6. Roku 2 Roku 2 Motherboard Replacement: шаг 6, изображение 1 из 1
    • Remove the cover over the A/V ports on the front of the device.

  7. Roku 2 Roku 2 Motherboard Replacement: шаг 7, изображение 1 из 1
    • Remove the board from the plastic enclosure.

Заключение

To reassemble your device, follow these instructions in reverse order.

Eric Rawls

Участник с: 08/24/15

360 Репутация

Автор 2 руководств

Команда

USF Tampa, Team 1-5, Sullivan Fall 2015 Участник USF Tampa, Team 1-5, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G5

3 членов

Автор 7 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 3

За последние 30 дней: 4

За всё время: 1,146