Перейти к основному содержанию

Roland G-800 Power Board Replacement

Выберете то, что вам нужно

  1. Roland G-800 Power Board Replacement, Top cover: шаг 1, изображение 1 из 1
    • Turn the keyboard upside down to access the screws

    • Remove 15 Philips PH2 screws

    • Don't worry about the other 16 screws, they hold the keys to the bottom case.

  2. Roland G-800 Power Board Replacement: шаг 2, изображение 1 из 2 Roland G-800 Power Board Replacement: шаг 2, изображение 2 из 2
    • Turn the keyboard upright again and lift the top cover from the front

    • Remove 6 connectors

  3. Roland G-800 Power Board Replacement, Power Board: шаг 3, изображение 1 из 2 Roland G-800 Power Board Replacement, Power Board: шаг 3, изображение 2 из 2
    • Remove the power output connector

    • Take note of the order of the wires here. In this case we have the white (neutral) wire on the left, but always double check when working with mains wiring.

    • Loosen the two flathead screws holding the mains wires to release them

  4. Roland G-800 Power Board Replacement: шаг 4, изображение 1 из 1
    • Remove 4 PH2 screws holding the board to the case.

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

Andrew

Участник с: 05/08/10

1 311 Репутация

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 10

За всё время: 1,795