Перейти к основному содержанию

Samsung CLP-300 Imaging Unit Replacement

  1. Samsung CLP-300 Imaging Unit Replacement, Imaging Unit: шаг 1, изображение 1 из 1
    • Turn the printer off and wait a few minutes for it to cool.

  2. Samsung CLP-300 Imaging Unit Replacement: шаг 2, изображение 1 из 2 Samsung CLP-300 Imaging Unit Replacement: шаг 2, изображение 2 из 2
    • Open the front cover

  3. Samsung CLP-300 Imaging Unit Replacement: шаг 3, изображение 1 из 1
    • Remove waste toner container from the printer.

  4. Samsung CLP-300 Imaging Unit Replacement: шаг 4, изображение 1 из 3 Samsung CLP-300 Imaging Unit Replacement: шаг 4, изображение 2 из 3 Samsung CLP-300 Imaging Unit Replacement: шаг 4, изображение 3 из 3
    • Pull the imaging unit out of the printer using bottom handle.

    • Use green handle on top of imaging unit to steady unit as you pull it out.

    • Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”

    • Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit

    • Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.

    • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Heather Howard

Участник с: 10/15/14

586 Репутация

Автор 4 руководств

Команда

University of Maine, Team 1-1, Diaz Fall 2014 Участник University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 членов

Автор 8 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 5

За последние 30 дней: 22

За всё время: 13,120