Перейти к основному содержанию

Введение

Motherboard prerequisite only.

Запчасти

Детали не указаны.

  1. Use the flat end of a spudger to disconnect the front-facing camera cable connector. Use the flat end of a spudger to disconnect the front-facing camera cable connector.
    • Use the flat end of a spudger to disconnect the front-facing camera cable connector.

  2. Carefully disconnect the digitizer display cable.
    • Carefully disconnect the digitizer display cable.

  3. Use a spudger to disconnect the display cable connector.
    • Use a spudger to disconnect the display cable connector.

  4. Remove the two 3 mm Phillips #00 screws.
    • Remove the two 3 mm Phillips #00 screws.

  5. Lift the micro-USB end of the motherboard away from the display assembly and pull it down. Be mindful that you don't snag the motherboard on any cables as you remove it. Be mindful that you don't snag the motherboard on any cables as you remove it.
    • Lift the micro-USB end of the motherboard away from the display assembly and pull it down.

    • Be mindful that you don't snag the motherboard on any cables as you remove it.

Заключение

To reassemble your device, follow these instructions in reverse order.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 31