Введение

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.

Запчасти

Никакие детали не требуются.

  • Remove the back battery cover.

Добавить комментарий

Remove the phone's battery.
  • Remove the phone's battery.

Добавить комментарий

Remove six (4.28 x 1.25)mm screws.
  • Remove six (4.28 x 1.25)mm screws.

Добавить комментарий

Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
  • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

Добавить комментарий

Peel off the Identification sticker.
  • Peel off the Identification sticker.

Добавить комментарий

Peel the button sensor on the side of the motherboard off of the case.
  • Peel the button sensor on the side of the motherboard off of the case.

Добавить комментарий

Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
  • Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.

Добавить комментарий

Peel up the camera attachment.
  • Peel up the camera attachment.

Добавить комментарий

You will now be able to replace the Camera component with a new part.
  • You will now be able to replace the Camera component with a new part.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Michelle Haddock

Member since: 20.04.2011

35 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 15-11, Regan Spring 2011 Member of Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 членов

Автор 14 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 1,632