Введение

Installing the front cover of the phone.

Запчасти

Никакие детали не требуются.

  1. Use a Philips #0 screwdriver to remove the two screws below the screen.
    • Use a Philips #0 screwdriver to remove the two screws below the screen.

  2. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Using the spudger, separate the black speaker cover from the top part of the phone. Gently remove the black speaker cover completely. Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.
    • Using the spudger, separate the black speaker cover from the top part of the phone.

    • Gently remove the black speaker cover completely.

    • Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.

  4. Once the two screws are taken out, use the spudger to remove the front cover of the phone. Once the two screws are taken out, use the spudger to remove the front cover of the phone.
    • Once the two screws are taken out, use the spudger to remove the front cover of the phone.

Заключение

To reassemble your device, follow these instructions in reverse order.

Ashley

Участник с: 22.10.2012

19 Репутация

Автор 2 руководств

Команда

Clemson, Team 14-6, Benson Fall 2012 Member of Clemson, Team 14-6, Benson Fall 2012

CLEM-BENSON-F12S14G6

3 членов

Автор 12 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 2

За всё время: 217