Введение
Use this guide to replace a damaged or broken motherboard.
Выберете то, что вам нужно
-
-
Use a Phillips head screwdriver to remove 5 screws from the camera. There are 2 4mm screws on the left side, 2 2mm screws on the right side and 1 4mm screw on the bottom.
-
-
-
-
Remove the yellow cable by pulling gently upwards, away from the inside of the camera, until it separates from its port.
-
-
-
Remove 2 3mm screws from the metal plate covering the motherboard and lens using a Phillips #00 screw driver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.
Команда
Marist, Team 1-6, Laflen Spring 2015 Участник Marist, Team 1-6, Laflen Spring 2015
MARS-LAFLEN-S15S1G6
2 членов
Автор 8 руководств
3 Комментариев
Where can you buy a replacement motherboard?
ST76 and ST77 are very close relatives.
As it can be seen on the parts, some are marked: ”ST77”
Paul
