Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

Sega Genesis Outer Case Replacement

Выберете то, что вам нужно

  1. Sega Genesis Outer Case Replacement, Outer Case: шаг 1, изображение 1 из 1
    • Remove the six screws from the underside of the console with a Phillips #1 screwdriver.

  2. Sega Genesis Outer Case Replacement: шаг 2, изображение 1 из 1
    • Flip the Sega Genesis upright.

  3. Sega Genesis Outer Case Replacement: шаг 3, изображение 1 из 1
    • Gently lift the top casing.

    • Note: the case will be connected to the main board by LED wires.

  4. Sega Genesis Outer Case Replacement: шаг 4, изображение 1 из 1
    • Bend out the LED leads into vertical positions.

  5. Sega Genesis Outer Case Replacement: шаг 5, изображение 1 из 1
    • Slide the LED wire apparatus off the lead pins.

    • Note: observe which color wire corresponds with which length of pin.

  6. Sega Genesis Outer Case Replacement: шаг 6, изображение 1 из 1
    • Separate the main board from the outer case.

Заключение

To reassemble your device, follow these instructions in reverse order.

17 участников успешно повторили данное руководство.

Erik Bjornstrom

Участник с: 10/04/10

829 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 3-29, Regan Fall 2010 Участник Cal Poly, Team 3-29, Regan Fall 2010

CPSU-REGAN-F10S3G29

4 членов

Автор 14 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 21

За последние 30 дней: 78

За всё время: 20,620