Введение
The HEPA filter is an air filter that traps harmful particles, such as pollen or dust. If it has been over a year or there is a bad odor when you use your vacuum, it might be time to replace the filter. Follow these steps to remove your filter either to clean or replace it.
-
-
Put two or three fingers under the tab located at the bottom of the HEPA Filter.
-
Push upwards on the tab at a slight angle to take off the cover.
-
-
-
-
Grasp the HEPA filter at the top and bottom and pull it slightly upwards to remove it.
-
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
3 человек успешно провели ремонт по этому руководству.
Команда
Cal Poly, Team S18-G5, Forte Fall 2017 Участник Cal Poly, Team S18-G5, Forte Fall 2017
CPSU-FORTE-F17S18G5
4 членов
Автор 10 руководств
