Перейти к основному содержанию

Shark Navigator Filter Replacement

Выберете то, что вам нужно

  1. Shark Navigator Filter Replacement, Filter: шаг 1, изображение 1 из 3 Shark Navigator Filter Replacement, Filter: шаг 1, изображение 2 из 3 Shark Navigator Filter Replacement, Filter: шаг 1, изображение 3 из 3
    • First unclip the dust canister from the body of the vacuum by lifting up the grey tabs on either side of the canister.

  2. Shark Navigator Filter Replacement: шаг 2, изображение 1 из 1
    • At the base of the vacuum will be a large plush filter. This is one of two filters in this compartment. Take this filter out.

  3. Shark Navigator Filter Replacement: шаг 3, изображение 1 из 1
    • The second filter is thinner and lies at the base of the vacuum. Replace this filter first before placing the larger replacement filter on top of it.

Заключение

To reassemble your device, follow these instructions in reverse order.

9 человек успешно провели ремонт по этому руководству.

Mara

Участник с: 03/27/15

493 Репутация

Автор 2 руководств

Команда

UMass Dartmouth, Team 5-4, Kish Spring 2015 Участник UMass Dartmouth, Team 5-4, Kish Spring 2015

UMASSD-KISH-S15S5G4

4 членов

Автор 16 руководств

0 Комментарии к руководству

Добавить комментарий

Статистика просмотров:

За последние 24 часов: 7

За последние 7 дней: 41

За последние 30 дней: 215

За всё время: 35,913