Введение
Replacing this filter can help reduce the abnormal noise and improve the smell of the vacuum.
-
-
Press the latch below the HEPA filter on the bottom of the front body of the vacuum and pull outwards with your hands.
-
Pull the grey and blue plastic cover down and away with your hands.
-
-
-
-
Pull the HEPA filter out by the grey plastic tab in the middle of the grate with your hands.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Cal Poly, Team S15-G2, Livingston Fall 2017 Участник Cal Poly, Team S15-G2, Livingston Fall 2017
CPSU-LIVINGSTON-F17S15G2
3 членов
Автор 14 руководств
Один комментарий
I bought two different HEPA filters for the front, and they just blow off. What is the part with the tab that you push down to get the filter out? Is that an extra part cuz I don't even have that.
