Skip to main content

Введение

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Turn off the Steam Pocket Mop and unplug it from the wall. Be sure that any water in the water tank cools before proceeding.
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  3. Push down on the round, grey release button near the connection point, while pulling the mop head out. The mop head should slide out and detach. When reassembling, you should hear it click into place if it is properly installed.
    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

Заключение

To reassemble your device, follow these instructions in reverse order.

Tyler Wicke

Участник с: 17.10.2018

219 Репутация

Автор 2 руководств

Команда

UW Tacoma, Team S1-G3, Rose Fall 2018 Member of UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 92