Введение
This guide will tell you step by step how to replace a malfunctioning Roller in a Shark Rocket HV381 Vaccum.
-
-
On the right-bottom of the body, pull down the black switch. You will hear an audible click when you detach the body from the vacuum head.
-
-
-
-
Laying the vacuum head on the its right side, push the orange "Eject Roller" switch down. The Roller can now be removed with ease.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Arkansas State University, Team S1-G5, Chamberlain Fall 2017 Участник Arkansas State University, Team S1-G5, Chamberlain Fall 2017
ARSU-CHAMBERLAIN-F17S1G5
3 членов
Автор 10 руководств
