Sony BDP-s7200 Disk Drive Replacement

Введение

Sometimes the disk tray won’t open, and your favorite movie is stuck inside. Before just going and buying a new movie, try following the tips here in the troubleshooting page for this device. If the troubleshooting page doesn’t solve the issue, you may need to replace the disk drive, and your favorite movie. Sometimes the DVD reader is defective, and you will need to replace the disk drive as a whole. This guide will demonstrate how painless it is to replace the disk drive and get your blu-ray player back to playing your favorite movies.

Выберете то, что вам нужно

Шаг 1 Back Cover

Sony BDP-s7200 Disk Drive Replacement, Back Cover: шаг 1, изображение 1 из 1

Remove the disk tray cover from the device.

Редактировать

Шаг 2

Using the Phillips #2 Screwdriver, remove the five 9mm from the bottom of the device.
Remove the metal cover.

Редактировать

Шаг 3

Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device.

Редактировать

Шаг 4

Pull off the back panel and remove it from the device.

Редактировать

Шаг 5 Front Panel Cover

Sony BDP-s7200 Disk Drive Replacement, Front Panel Cover: шаг 5, изображение 1 из 3

Sony BDP-s7200 Disk Drive Replacement, Front Panel Cover: шаг 5, изображение 2 из 3

Sony BDP-s7200 Disk Drive Replacement, Front Panel Cover: шаг 5, изображение 3 из 3

Using the plastic opening tool, open one of the tabs on the bottom of the device.
While keeping the tab open, insert a opening pick in between the opening tool and tab.
Repeat this for the 3 other tabs.

Редактировать

Шаг 6

Place your hands on the two black circles on the bottom of the device.
Pull on the black circles to remove the device from its front panel cover.

Редактировать

Шаг 7

Sony BDP-s7200 Disk Drive Replacement: шаг 7, изображение 3 из 3

Using the Phillips #2 Screwdriver, remove the seven 9mm screws from the top of the device.
Using the same screwdriver, remove the three 9mm screws from the back of the device.
Using the same screwdriver, remove the one 9mm screw still connecting the small metal clip to the front of the device.