Перейти к основному содержанию

Введение

Use this guide if your radio is not working and the antenna needs to be replaced. This is an easy part to replace and requires a standard Phillips #1 screwdriver.

Запчасти

Детали не указаны.

  1. Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole. Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.
    • Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver.

    • Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Tess

Участник с: 14.10.2014

439 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 10-38, Amido Fall 2014 Участник Cal Poly, Team 10-38, Amido Fall 2014

CPSU-AMIDO-F14S10G38

5 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 5

За последние 30 дней: 14

За всё время: 1,716