Введение

Keeping the back panel in good condition is key to extending the lifetime of the camera.

Запчасти

Никакие детали не требуются.

  1. Power down the camera and remove the batteries.
    • Power down the camera and remove the batteries.

    Добавить комментарий

  2. Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.
    • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

    • There are six 5.22mm long, 3.00mm head diameter screws total.

    • The left side is not shown but there should be 1 screw on that side.

    Добавить комментарий

    • Remove the back casing.

    • The casing itself is sturdy so don't be afraid to remove it forcefully.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Trystan Jasperson

Участник с: 17.03.2018

231 Репутация

Автор 2 руководств

Команда

Baylor, Team S5-G4, Williams Spring 2018 Member of Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 62