Введение

This is a step by step guide to uninstalling the front casing of the camera.

Запчасти

Никакие детали не требуются.

  1. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Using a spudger, carefully pry open the front casing.
    • Using a spudger, carefully pry open the front casing.

  5. Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Участник с: 09.03.2012

191 Репутация

Автор 7 руководств

Команда

Clemson, Team 1-5, Benson Spring 2012 Member of Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 членов

Автор 7 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 1,098