Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
If the device is having trouble reading disks, the laser may need to be replaced.
Выберете то, что вам нужно
-
-
Remove the five exposed 7.9 mm screws using a Phillips screwdriver.
-
Punch through the warranty sticker with the spudger.
-
Remove the screw underneath with the Phillips screwdriver.
-
-
-
Remove the rubber feet using the spudger.
-
Remove the screws that were covered by the rubber feet.
-
-
-
Gently remove the wires with tweezers by pulling up on the base they are attached to.
-
-
-
-
Be careful when removing the rods because a fragile metal piece may break.
-
Pull laser off of the rods.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.