Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

This is a guide to show you how to replace the cushions on the Sony MDR-XB450AP headphones. Replace these if you are experiencing discomfort and/or if there is visible wear and tear to the cushions themselves.

Запчасти

Детали не указаны.

  1. Begin by laying the headphones down flat on a surface.
    • Begin by laying the headphones down flat on a surface.

    • Make sure that the headphone speakers are facing upward.

    • Be sure to check that the headphones are not plugged into any devices.

  2. Using the plastic opening tools, gently pry the speaker from the headphone's base.
    • Using the plastic opening tools, gently pry the speaker from the headphone's base.

    • There will be some tearing involved, but this is necessary to remove the original cushion.

    • The cushion is bonded to the headphones with a circular adhesive strip. If you plan on reusing the cushion, try to keep the adhesive attached to the cushion during removal. This way the cushion can be easily re-attached to the headphones after repair.

Заключение

To reassemble your device, follow these instructions in reverse order.

8 участников успешно повторили данное руководство.

Terrance Gallaher

Участник с: 18.01.2017

849 Репутация

Автор 5 руководств

Команда

Eastern Washington University, Team 2-7, Crane Winter 2017 Участник Eastern Washington University, Team 2-7, Crane Winter 2017

EWU-CRANE-W17S2G7

2 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 13

За последние 30 дней: 29

За всё время: 3,845