Перейти к основному содержанию

Введение

Outline what you are going to teach someone how to do.

Запчасти

No parts specified.

  1. Unscrew the screws on the top of the radio.
    • Unscrew the screws on the top of the radio.

  2. Open the CD and cassette doors and remove the screws in the compartments. To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.
    • Open the CD and cassette doors and remove the screws in the compartments.

    • To open the CD door push on the bottom left corner of the CD door. To open the cassette door push the button that is to the left of the pause button.

  3. Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.
    • Flip the radio upside down and remove the battery cover. Unscrew the one screw below the batteries.

  4. Remove the top of the radio enough to access the wires for removal.
    • Remove the top of the radio enough to access the wires for removal.

    • Do not forcefully remove the whole top piece of the radio! There will be wires connected to the top cover and circuit board.

  5. Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now

    Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now
  6. Remove all of the wires that are connected to both the circuit board and the underside of  the top of the radio by pulling them where they are connected
    • Remove all of the wires that are connected to both the circuit board and the underside of the top of the radio by pulling them where they are connected

    • This should include three sets of red and white wires, one set of white wires, one set of black wires, and two ribbon wires. Some cannot be disconnected from the top piece of the radio. Disconnect these plugs from the circuit board.

  7. Locate the motor of the radio on the underside of the top of the radio.
    • Locate the motor of the radio on the underside of the top of the radio.

  8. Unscrew the screw holding the motor to the top of the radio.
    • Unscrew the screw holding the motor to the top of the radio.

  9. Lift up the motor.
    • Lift up the motor.

    • Don't lift too high because the motor stand will break.

  10. Unhook the larger band from under the motor and remove it.
    • Unhook the larger band from under the motor and remove it.

  11. Replace the band by hooking it beneath the motor.
    • Replace the band by hooking it beneath the motor.

  12. Push the motor back down and screw it into place.
    • Push the motor back down and screw it into place.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Ian Nussman

Участник с: 25.10.2013

827 Репутация

Автор 6 руководств

Команда

University of Maryland, Team 2-5, Gulbrandsen Fall 2013 Member of University of Maryland, Team 2-5, Gulbrandsen Fall 2013

UMD-GULBRANDSEN-F13S2G5

2 членов

Автор 6 руководств

Один комментарий

I'm worried about removing wires. How do you put them back? Doesn't that take some kind of special equipment/glue?

Carolyn Farley - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 9

За 30 дней: 27

За всё время: 2,802