Выберете то, что вам нужно
-
-
Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.
-
-
-
First, you must remove the black tape on the circuit board.
-
Next, pull up on the red and gold band until it detaches from the chip.
-
-
-
-
Using a soldering iron, carefully heat the metal connecting the wires from the device to the circuit board.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.