Выберете то, что вам нужно
-
-
Heat up the back cover to soften the adhesive.
-
Place the suction cup to open a gap from top side, then insert guitar picks and slide it to cut the adhesive underneath.
-
Remove back cover.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
5 участников успешно повторили данное руководство.
2 Комментариев
where i can get the plastic bracket? my plastic bracket is broke
Step 4: the flash/lamp is lighly glued to the back frame. It must be delicately unglued off before the frame can be removed.