Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

Prereq-only guide for disconnecting the supply tube from a gravity flush toilet.

  1. Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight. The appearance of this valve may differ from toilet to toilet, but most operate the same.
    • Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight.

    • The appearance of this valve may differ from toilet to toilet, but most operate the same.

  2. Place a bucket under the supply tube to catch any dripping water. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.
    • Place a bucket under the supply tube to catch any dripping water.

    • Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.

Заключение

To reassemble your device, follow these instructions in reverse order.

Ron Davis

Участник с: 17.02.2015

25 286 Репутация

Автор 13 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 88