Введение

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

  1. Turn off record the player before making repairs. Unplug the record player.
    • Turn off record the player before making repairs.

    • Unplug the record player.

  2. Open the lid to access the turntable, arm, and stylus. Open the lid to access the turntable, arm, and stylus.
    • Open the lid to access the turntable, arm, and stylus.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Press down on the front of the red stylus and pull forward to remove it from the arm.
    • Press down on the front of the red stylus and pull forward to remove it from the arm.

  5. Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.
    • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

Финишная черта

One other person completed this guide.

Charles Lockner

Участник с: 17.09.2012

103 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 2-61, Propen Fall 2012 Member of Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 8

За 30 дней: 24

За всё время: 1,287