Введение
Use this guide to disconnect the Connector Board of the OP-1.
Выберете то, что вам нужно
-
-
Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating.
-
Lift the back panel and remove it. The Connector Board is revealed.
-
Disconnect the flex connector by lifting it up with a spudger.
-
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.
Команда
