Перейти к основному содержанию

Texas Instruments TI-83 Plus Keyboard Mat Replacement

Выберете то, что вам нужно

  1. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Backup Battery: шаг 1, изображение 1 из 2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Backup Battery: шаг 1, изображение 2 из 2
    • Remove the battery cover.

    • Remove the AAA batteries from the calculator.

  2. Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 2, изображение 1 из 1
    • Remove the 5mm Philips #00 screw holding backup battery cover.

    • Remove the backup battery cover.

  3. Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 3, изображение 1 из 1
    • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

    • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

  4. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Back Case: шаг 4, изображение 1 из 1
    • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

  5. Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 5, изображение 1 из 2 Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 5, изображение 2 из 2
    • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

  6. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Motherboard & Screen: шаг 6, изображение 1 из 2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Motherboard & Screen: шаг 6, изображение 2 из 2
    • Keep the screen face-down during this step. Only the motherboard is attached to the face-plate and the screen may fall out.

    • Remove the eight (8) 5mm Philips #00 screws on the motherboard.

  7. Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 7, изображение 1 из 2 Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 7, изображение 2 из 2
    • Carefully remove the motherboard and screen. Grab the board by its side with one hand and the screen with the other. Carefully lift the two parts up.

    • Keep the face-plate face-down to prevent the keys from falling out.

  8. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Keyboard Mat: шаг 8, изображение 1 из 2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Keyboard Mat: шаг 8, изображение 2 из 2
    • Remove light gray rubber keyboard mat.

    • Keep your calculator face down to ensure the individual keys do not fall out.

  9. Texas Instruments TI-83 Plus Keyboard Mat Replacement: шаг 9, изображение 1 из 1
    • Clean the contacts on the keyboard with a soft cloth.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

corey

Участник с: 10/02/12

11 Репутация

1 руководство автора

Команда

Cal Poly, Team 18-37, Regan Fall 2012 Участник Cal Poly, Team 18-37, Regan Fall 2012

CPSU-REGAN-F12S18G37

5 членов

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 6

За последние 30 дней: 20

За всё время: 4,591