Введение
In this guide the push button is replaced. If the button is no longer working or the button is sticky this is the guide for you.
Выберете то, что вам нужно
-
-
Unscrew the seven screws located on the back of the device.
-
-
-
Slide the plastic the spudger along the edge of the device to separate the keyboard tray.
-
-
-
Flip the device over and open it to lift the keyboard tray from the body of the device.
-
-
-
-
Use the Plastic Spudger to gently release the ribbon cable attached to the keyboard.
-
Place device to side.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.