Перейти к основному содержанию

Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement

Выберете то, что вам нужно

  1. Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement, Bottom Cover: шаг 1, изображение 1 из 1
    • Remove the black 10mm using a JIS #1 screw driver.

    • There are 12 screws.

    • Two of the screws are deep inside the device you might need to use a slim screwdriver.

    • In the picture you see a plastic opening tool instead of screw driver because we did not have our screw driver when we were taking the picture.

  2. Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement: шаг 2, изображение 1 из 2 Thustmaster Ferrari 458 Spider Racing Wheel Bottom Cover Replacement: шаг 2, изображение 2 из 2
    • Remove the two 10mm black screws on the top of device using a Hex 2.5mm Key. Only the two outside screws.

    • Gently pull apart both halves of device to access inside.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Mohammed Alsogair

Участник с: 10/18/17

339 Репутация

Автор 2 руководств

Команда

USF Tampa, Team S1-G33, Cagle Fall 2017 Участник USF Tampa, Team S1-G33, Cagle Fall 2017

USFT-CAGLE-F17S1G33

4 членов

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 39

За всё время: 5,441