Введение

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Запчасти

Никакие детали не требуются.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Добавить комментарий

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Добавить комментарий

  • Lift the cover up and off the device.

Добавить комментарий

  • Locate the power supply.

Добавить комментарий

  • Remove the belt connecting the power supply to the motherboard by pulling it out.

Добавить комментарий

  • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

Добавить комментарий

  • Remove the two 0.31 inch T-9 screws from the power supply.

Добавить комментарий

  • Pinch the plastic plugs and lift the power supply up to detach from plugs.

  • All 4 plugs must be detached to remove power supply.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Участник с: 11.10.2011

41 Репутация

1 Guide authored

Команда

Cal Poly, Team 5-33, Amido Fall 2011 Member of Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 1,046